Clemons Concrete Coatings Supreme Shield SB-600 Clear Wet Look Concrete Sealer, 5-Gallon

SUPREME SHIELD SB is a solvent-based penetrating sealer designed for stamped concrete, concrete pavers, and other porous concrete surfaces. The application of SUPREME SHIELD SB will enhance the color and give the wet look without adding the gloss and plastic look associated with traditional film-forming sealers. Once treated, the surface repels water and oil to prevent staining.

Preparation: Clean the surface of dirt, wax, grease, oil, and other contaminants. Ensure that any previous coating, unless it is the same or similar solvent-based sealer or stain, is removed. Make sure the surface is clean, dry, and sound. Rinse well with a pressure washer and allow 24 hours to dry. Apply only when the surface and air temperatures are above 50°F and below 90°F. For pavers, sweep away any loose sand.

Application: A brush may be used where a roller or sprayer cannot reach. Do not pour the product directly from the can onto the concrete. Apply evenly from the can or another metal container using an appropriate roller. If rolling, use a solvent-resistant nap roller. Every few feet, turn perpendicular to the first coat and cross-roll without re-dipping. This gives a heavy application, and the cross-rolling allows for an even application. Do not allow the product to puddle. If spraying, use an acetone-resistant pump sprayer and clean up immediately with an aromatic solvent such as A-1 Solvent or Xylene. Do not thin the product.

Avoid foot traffic for 4 hours and vehicle traffic for 48 hours. Cooler temperatures or increased humidity will slow the drying process.

Coverage Rates: Two thin coats are recommended. Over-application may result in a slick surface. - Textured or Stamped: 200 sq. feet per gallon - Broom Swept: 200 sq. feet per gallon - Concrete Pavers: 100 sq. feet per gallon

VOC Regulations: This product cannot be shipped to the following states with Low VOC Regulations: AZ, CA, CT, DC, DE, IL, IN, MA, MD, ME, NH, NJ, NY, OH, PA, RI, VA, VT.

Key Features: - Enhances and preserves the natural color with a wet look - Protects brick pavers and decorative concrete - No gloss or shine - Breathable styrene acrylic - will not turn white - Water and salt resistant - Stain and oil resistant

Note: Supreme Shield SB-600 is not suggested for clay pavers or plain poured concrete.

Included components: 5-Gallon Pail

product information: